Esys Software Psdzdata 54

May 24, 2018  Different between Psdzdata Full and Lite: If you’re not going to flash the ECU and just doing FDL coding then the lite version is all you need. Lite version is identical, but with all the SWFL (flash firmware files) removed, which are only needed for Flashing (not coding), so it. E-SYS 3.23.4 software and V50.3 data installation packages and ETOKEN and PIN. What is the psdzdata? The Psdzdata is basically a pack that contains all the data needed for E-sys software to be able to code a car, flash ecus and firmware update of the modules on the car. Full Psdzdata vs Lite Psdzdata for Esys.

Dec 21, 2017  This tool also injects descriptive text back into the CAFD & FAFP files, so you can use PSdZDATA above version 54.1. ESYS Launcher Premium is the “free” version of Launcher offered by “Token Master”. It is intended for personal use on 1 chassis. There are limitations in the software that limit you from how frequently you. The newest Esys 3.33.4 and Launch Pro 3.4.0 cannot work for you. Most pp cannot get good tech support when the have issues. The only way to go is forums. To use with relief, Esys 3.23.4 is the best. Professionals have tested for thounsands of time for BMW F series coding with an ENET cable. Link to Esys. Apr 16, 2015  If you have E-sys and an appropriate esys cable, you can check to see if the vehicle you are connected to has the ISTA/P v2.54.2, v2.54.3, or 2.55 version of software. Check the level of firmware installed in the F-series chassis BMW. Referencing the table above, connect to the vehicle with E-Sys and: Click the Expert Tab on the far left menu bar.

Here is the little tutorial on installing BMW ENET cable E-Sys, E-Sys Launcher and psdzdata F-series coding software.

The document was translated from Korean and modified by obdii365.com for educational purpose. Credit to Jihunx from South Korea. You are at your risk.

Versions:

E-Sys 3.27.1

E-Sys Launcher Premium 2.6.0

psdzdata 3.59.5 lite version

Download all the necessary files here.

Operating system:

The installation environment is a computer with Windows 10 64-bit system (depending on the installation environment, Microsoft’s .NET Framework installation may be necessary when installing the coding program).

Installing E-Sys

First unzip E-Sys 3.27.1.rar.

Extract E-Sys_Setup-3.27.1_RC_b44813.exe will launch the files in the E-Sys Program folder .

Install E-sys setup wizard, press Next

Accept license agreement, press Next

Select the folder to install and click Next. I can install it in another location, but I will install it without changing it in the default installation folder for easy explanation later.

Select the folder where the data will be installed besides this program and press Next. Likewise, I will not change from the default folder.

Select the name of the folder you want to create in the Start menu and press Next.

Select whether to create a shortcut icon on the desktop, and then click Next. It will not run Esys anyway, but you will run the program with E-Sys Launcher, so uncheck Create desktop icon.

Click Install

Installation is complete. Press Finish.

Install E-Sys Launcher Premium

When installing E-Sys Launcher, if you see the following E-Sys Launcher Premium cannot be installed on systems with .NET Framework version lower than 4.5.2.error, .NET Framework it is not installed. In this case .NET Framework, you can install. Download it here

ESysLauncherPremiumSetup_2.6.0_Build_119.msi. Depending on the computer OS installed, the following screen may appear.

Press Next

Select the folder to install and click Next.

E-sys Software

Click Install

Installation is complete. You do not need to read the readme file, uncheck it, and leave the check box to run the launcher checked Finish. Of course, it is ok to run E-Sys Launcher program separately after unchecking and exiting both.

Token generation

When you run E-Sys Launcher for the first time, a screen for entering Path and PIN is displayed as shown below. As I mentioned before, to run E-Sys requires a token, which is where to store it and how to set the token-generation password.

..Click the icon at the right end of the path to select the folder where Token will be installed. As a convenience, I chose the C: Data folder where E-Sys data was installed .

Esys Software Psdzdata 547

4~12 numbers or alphabetic characters Enter your PIN and Confirm . I just entered 123456.

When you are finished typing, press Generate Token.

You’ll see a message that the token was successfully generated.

Launcher execution screen. If you are here, all programs have been successfully installed.

Install psdzdata 3.59.5 lite version

Psdzdata_v3.59.5_lite.rar When unzipping, the Psdzdata following folders are located below the folder. Copy or cut all of these folders.

Paste psdzdata copied or cut folder into the folder under the folder where E-Sys data is installed .

You have now installed all the programs for F-series coding. Done!!!

Who Viewed This Article Also Views:

Thred: BMW Flashing/Programming using BMW ISTA with PsdZData Full

Environment/Setup
I have set up ISTAD and ISTAP within Oracle VirtualBox virtual machine.

Windows 7 x64 Enterprise with SP1
ISTAD v4.3.21
ISTAP v3.60.2
PsdZData v60.1 Full
BMW ICOM A2 Clone Mac os x free software.

Using my girlfriend’s loaner F25 X3 28i as a power supply in order to keep voltage between 14.0 and 14.9. This seemed sufficient for maintaining voltage and a temporary alternative to purchasing a Schumacher INC-700A power supply/charger.

BMW ICOM A2 clone…

ISTA-D v4.3.21

My understanding was that ISTAD v4.x.x was supposed to be able to do flash programming and eventually replace ISTAP. I have not been able to get this working with my setup after weeks of trying. Not sure if anyone else has gotten this functionality to work. Otherwise, ISTAD has been great in terms of serving as diagnostic software and factory service manual.

VCI configs…

It would seem to calculate measures fine which is another way of saying determine which modules need to be flashed. However, pressing “Execute measures plan” would result in no action.

ISTA-P v3.60.2

I finally decided to give ISTAP a try. I know flash programming can be done via ESYS after talking with number more experienced forum members, but I prefer a factory all-in-one solution for simpletons like myself. Fortunately, ISTAP worked when ISTAD did not.

ISTAP reading vehicle data after starting New Session…

ISTAP preparing vehicle for programming…

ISTAP programming vehicle in progress. You can see the status bars below the module names.

What the display says when in the first few minutes of programming…

I did see the “Emergency call malfunction” warning after I restarted the car after completing the flash. It went away after driving for a bit.

A few notes:
– Total duration for everything was about 57 mins
– ISTAP will flash firmware onto the modules and then code them. The coding process is automatic and it is fairly short. However, there will be a few dialog boxes that pop up to warn you or instruction you to do certain things such as calibrate the steering wheel angle, close all doors, etc. You’ll see your instrument cluster, climate system, windows/sunroof activate and deactivate. Don’t worry. Your car is not possessed, it’s just ISTAP doing everything to re-initialize your vehicle.
– You will lose your previous coding. For example, I had VO coded Bluetooth Audio/Media, tire pressure and temperature displays, and 6 blinks instead of the default 3 blinks for the turn signals. You will have to re-code all of that.

PsdZData Full
So one major issue that I foresaw was that ISTAD, ISTAP, and ESYS all have different places they want to access PsdZData Full. You don’t want to have 3 separate places to store all this data because it would consume a ridiculous amount of space. PsdZData Full is about ~70 GB. The solution is to decide where you want to keep the real physical PsdZData Full and create symbolic links for the other two applications to utilize.

Code:

Esys Software Psdzdata 548

mklink /J « C:RheingoldPSdZdatapsdzdata » « C:ISTA-PBMWServicesdataecudatapsdzdata »

Where ISTAD thinks psdzdata is.

Where psdzdata really is.

I’ve also attached a « FinalReport.pdf » that basically describes which control modules have been updated. It’s neat because it provides a « diff » between beginning and end.

Final Report:

I obtained most of my factory BMW software from CarTechnology forums: http://cartechnology.co.uk/forumdisplay.php?fid=61

Src: http://f80.bimmerpost.com/forums/showthread.php?t=1339423

But the images there seem not available. You can go to

http://www.obd2diy.fr/wholesale/201712-bmw-icom-software-ista-d-40812-ista-p-3630400-engineering-mode-windows-7.html for the latest 2017.12 ista-d ista-p images

Qui ont consulté cet article ont également consulté: